Universities

Main sponsor

Gold sponsors

Silver sponsors

State funding

FEST27

The FEST27 project is funded from the state budget's research and development funding.

Formula Student Team Tallinn is developing a new mechanical platform and a new generation of high- and low-voltage systems for the electric race car FEST27. A completely new composite monocoque, an aero package that meets the rule changes, torsion-spring suspension and redesigned corner assemblies and planetary gearboxes make the car lighter, stiffer and easier to handle. A self-designed electric motor, a compact and efficient inverter, a battery pack designed to the new rules and EMC-aware electronics with sensors and telemetry make it possible to build a lighter, more reliable and more energy-efficient car that can drive both with and without a driver. Students taking part in the project gain hands-on experience in top-level product development. The finished FEST27 will compete in international Formula Student product development competitions.

Read more

Aim and results

The aim of the project is to develop and build a new-generation mechanical platform and high- and low-voltage systems for the electric race car FEST27. By the end of the project, a complete chassis, suspension and aerodynamics solution will be finished – a composite monocoque with new geometry, suspension based on torsion springs and self-developed dampers, an aero package complying with the 2027 rules and a redesigned corner assembly and planetary gearbox – together with a complete powertrain and electronics architecture consisting of a self-developed electric motor prototype (TVT 5), a new-generation inverter (TVT 7), a battery pack designed to the new rules and an EMC-aware low-voltage system with sensors and the team's self-developed telemetry solution. These systems will be integrated into FEST27, which will compete in international Formula Student product development competitions to validate the finished systems, with the goal of fighting for podium places.

In September, at least 50 new students are expected to join the project. Through developing the mechanical platform and the high- and low-voltage systems, they will gain in-depth knowledge of composite structures, suspension design and manufacturing, kinematics, aerodynamics, power electronics, battery technology, electronics, sensor systems, manufacturing technologies and testing methods. One of the project's most important goals is to develop students and ensure a new generation of top-level engineers in Estonia, and to promote engineering education among young people by showing that university studies can be combined with developing a world-class electric race car.

Grant amount: 200 000 €

FEST26

The FEST26 project is funded from the state budget's research and development funding.

Formula Student Team Tallinn is building the electric race car FEST26, which can drive both with and without a driver. Thanks to a novel battery pack cooling technology and a more compact self-developed inverter, it is possible to achieve a more efficient and lighter car than before. The finished car will compete in international Formula Student product development competitions.

Read more

Aim and results

The aim of the project is to develop and build the electric race car FEST26. In September, at least 45 new students are expected to join the Formula Student project. Through independent learning and the support of senior members, they will gain in-depth knowledge of engineering and product development. One of the project's biggest goals is to develop students and contribute to the growth of top-level engineers in Estonia, as well as to promote engineering education among young people and inspire them to pursue a technical university degree.

Thanks to the new battery pack cooling technology and the more compact self-developed inverter, the FEST26 design can be changed significantly, bringing gains in mass and efficiency. The finished car will achieve several podium places at international product development competitions. Members of the Formula Student team are ready to find the most optimal solutions for each specific situation, which will make them valued specialists on the job market in the future.

Grant amount: 100 000 €

FEST25

The FEST25 project is funded from the state budget's research and development funding.

Formula Student Team Tallinn is building the electric race car FEST25, which is lighter and more efficient than before. For the first time in the team's history, the car will run on self-developed inverters, aimed at achieving better efficiency and lower mass than the off-the-shelf products used so far. The finished car will compete in international Formula Student product development competitions.

Read more

Aim and results

The aim of the project is to develop and build the electric race car FEST25. In September, at least 35 new students are expected to join the Formula Student project. Through independent learning and the support of senior members, they will gain in-depth knowledge of engineering and product development. One of the project's biggest goals is to achieve better efficiency, which makes it possible to reduce the overall mass of the car. The self-developed inverter, validated on a dynamometer, will be installed in the car for the first time, and new copper cells will be used in the battery pack. The finished car will achieve several podium places at international product development competitions. Members of the Formula Student team are ready to find the most optimal solutions for each specific situation, which will make them valued specialists on the job market in the future.

Grant amount: 100 000 €

FEST24

The FEST24 project is funded from the state budget's research and development funding.

Formula Student Team Tallinn is building the electric race car FEST24, which can drive both with and without a driver. For the first time in the team's history, the car will run on self-developed motors and inverters, aimed at achieving better efficiency and reliability than the off-the-shelf products used so far. The finished car will compete in international Formula Student product development competitions.

Read more

Aim and results

The aim of the project is to develop and build the electric race car FEST24, which can drive both with and without a driver. For the first time in the team's history, the car will run on self-developed motors and inverters, which are expected to be more efficient and reliable than the off-the-shelf products used so far. One of FEST24's biggest goals is to achieve better efficiency, which makes it possible to reduce the overall mass of the car. In September, at least 35 new students are expected to join the Formula Student project. Through independent learning and the support of senior members, they will gain in-depth knowledge of engineering and product development. Members of the Formula Student team are ready to find the most efficient solutions for each specific situation, which will make them valued specialists on the job market in the future – in industry, too, it is important that processes are as efficient as possible.

Grant amount: 100 000 €

FEST23

The FEST23 project is funded from the state budget's research and development funding.

Formula Student Team Tallinn is building a unique electric race car that can drive both with and without a driver. The prototype will compete in international Formula Student competitions in summer 2023. For the first time in the team's history, the motors and inverters needed for the car are being developed in-house; they will be tested on the 2023 car and used in the vehicles of the following years.

Read more

Aim and results

The aim of the project is to build a unique electric race car in the Baltics that can drive both with and without a driver – FEST23. The finished car will take part in at least four Formula Student product development competitions, with the goal of achieving dozens of podium places and at least one overall win. For the first time in Formula Student Team Tallinn's history, the team is also developing motors and inverters, which will be tested on the 2023 car and used in the following vehicles. The aim of this development is to achieve more efficient and reliable components and to reduce dependence on manufacturers. The goal of the whole Formula Student project is to give students a practical outlet for their engineering studies and top-level knowledge. Another major goal is to promote engineering and guide young people to choose technical fields for further study. Actually designing and building a race car inspires current and future students far more than theoretical knowledge alone. Engineers who grow out of the Formula Student project have high-level knowledge and skills with which they in turn contribute significantly to the Estonian economy, through knowledge, a skilled workforce and the development of new technological solutions that make people's lives better.

Grant amount: 100 000 €

Your company on our car

We're always looking for new partners – material suppliers, software providers, manufacturers and financial supporters. Let's talk about what a partnership could look like.

Get in touch